Run of show for a conference
A conference is several shows running side by side. The run of show has to keep each room on time by itself and keep all of them meeting up again at every break.
The short answer
Build one run of show per room, per day. Fix the moments every room shares, such as the opening, breaks, lunch and the close, and let each room's sessions fill the time between them. Put changeovers and walking time in as their own rows. When a session runs over, the room gives the time back before the next shared moment.
What makes a conference different
- Several rooms at once. A main stage and breakouts run in parallel, each with its own crew.
- Shared moments. Everyone breaks, eats and comes back together at the same times.
- A new speaker every session. Each one needs a microphone, their slides and someone to bring them on.
- More than one day. Day two starts from what happened on day one.
One list per room, per day
A single sheet for the whole conference becomes unreadable by the second breakout. Give each room its own list for each day. A main stage and four breakouts over three days is fifteen lists. Each room's crew reads only theirs. The producer and the venue see all of them.
Fix the shared moments first
Breaks, lunch, the opening and the close are the times every room has to hit, and the kitchen is working to them. Treat them as fixed points. Sessions are built between them. If a room slips, it has until the next break to recover, and it must not push the break.
Give changeovers and walking time their own rows
The gap between two sessions is work: one speaker off, the next one fitted with a microphone, slides swapped, chairs moved for a panel. Write it as a row with a length and an owner. Do the same for the time guests need to walk between rooms. If these are not on the list, they come out of the next session.
Speakers
For each session, add the rows the speaker depends on, tied to the session and not to a clock time:
- Slides received and loaded.
- Speaker arrives and checks in.
- Microphone fitted, usually during the session before.
- Who introduces them, and who brings them to the stage.
A worked example: main stage, day one morning
| Start | Length | Item | Owner | Notes |
|---|---|---|---|---|
| 7:30 AM | 60 min | Registration and coffee | Registration lead | Fixed. Printed on the agenda. |
| 8:30 AM | 15 min | Doors and walk-in | Stage manager | Keynote speaker fitted with microphone. |
| 8:45 AM | 10 min | Welcome | Stage manager | Host on lectern microphone. |
| 8:55 AM | 40 min | Opening keynote | Stage manager | Slides on centre screen. |
| 9:35 AM | 10 min | Changeover | Technical lead | Four chairs and four handheld microphones for the panel. |
| 9:45 AM | 45 min | Panel | Stage manager | Cut first: audience questions. |
| 10:30 AM | 30 min | Break | Banquet captain | Fixed. All rooms break together. |
| 11:00 AM | 45 min | Breakouts, session one | Room hosts | Main stage and three breakout rooms, each on its own list. |
| 11:45 AM | 15 min | Walking time | Room hosts | Guests move to lunch. |
| 12:00 PM | 60 min | Lunch | Banquet captain | Fixed. Matches the venue's order. |
When a session runs over
- Cut inside the room first. Audience questions are the usual place.
- Shorten the changeover only if the next session needs little set-up.
- Do not push the break. Other rooms and the kitchen are working to it.
- Tell the room host what was cut, so the next speaker is not surprised.
What each person gets
A room host gets their room for the day. The technical team gets every room they staff. A speaker gets their own session: arrival, where to check in, when they are fitted with a microphone and how long they have. The venue gets everything. More on this in what to send each vendor, and the general method is in how to build a run of show.
Common questions
How many run of shows does a conference need?
One per room, per day. A conference with a main stage and four breakout rooms over three days has fifteen. Each room's crew works from its own list, and the producer and venue see all of them.
What are the fixed points in a conference run of show?
The moments every room shares: registration, the opening, breaks, lunch and the close. They are printed on the agenda and the kitchen works to them, so sessions are built to fit between them.
What happens when a conference session runs long?
The room gives the time back before the next shared break. Cut audience questions first, shorten the changeover if you can, and leave the break where it is, because other rooms and the kitchen depend on it.
Should changeovers be on the run of show?
Yes. Swapping speakers, microphones and slides takes real time. Give each changeover its own row with a length and an owner, or it will come out of the next session.
What does a conference speaker need to know?
When to arrive and where to check in, when their slides are due, when they will be fitted with a microphone, who introduces them, and exactly how long they have.