Run of show, cue sheet and production schedule: what's the difference?
Agenda, run of show, cue sheet, production schedule, call sheet, BEO. The names overlap and companies draw the lines in different places. Here is how they usually divide, and where people disagree.
The short answer
| Document | Covers | Read by | Unit of time | Usually made by |
|---|---|---|---|---|
| Agenda | The program guests experience | Guests, client | Sessions | Planner or client |
| Production schedule | Load-in to load-out, across all days | Producer, crew, vendors, venue | Hours and days | Producer or production manager |
| Run of show | The program in one room or on one stage, item by item | Whole show crew | Minutes | Producer or show caller |
| Cue sheet | Each technical action inside the program | Show caller and operators | Seconds, or a spoken line | Show caller, stage manager, department leads |
| Call sheet | Who reports where and when, for one day | Crew, vendors, talent | One day | Production manager or coordinator |
| Banquet event order | What the venue will set up and serve | Venue departments | Service times | Venue's catering or event manager |
Agenda
The agenda is the public version. It tells a guest that dinner is at 6:30 and the keynote is at 7:15. It is written for people who need to know where to be, and it leaves out everything that makes those moments happen.
It still matters to the crew, because it is a promise. If the agenda the client sent to guests says 7:15 and the run of show says 7:25, one of them is wrong, and the guests are holding the first one.
Production schedule
The production schedule covers everything around the show. Truck arrivals and the dock booking. Load-in by department. Crew calls, meal breaks and coffee breaks. Rehearsals and sound checks. Venue access hours and security. Production meetings. Strike and load-out. On a multi-day event it also carries things like registration hours and shuttle departures.
It gets written early, because it drives crew bookings, truck rentals and what you ask the venue for. On a large show it runs to several pages. Event day, the part guests see, is one block on it.
A typical load-in day on a production schedule looks something like this: crew call in the morning, trucks unloaded, rigging and truss first because nothing can be hung until it is up, then audio, video and lighting building underneath, with a walk-away lunch in the middle. Strike runs the other way.
Run of show
The run of show opens up when you look inside that event-day block. It is the program, item by item, for one room or one stage: doors, walk-in, welcome, dinner, keynote, awards, band, goodnight. Each row has a start, a length, an owner and notes for the crew.
A conference with a main stage and four breakouts has five of them. A three-day event has one set per day. If you only keep one document for the day of the event, this is the one. There is a fuller explanation in what is a run of show, and a copyable one in the run of show template.
Cue sheet
A cue sheet zooms in again. Where the run of show says "Keynote, 25 minutes", the cue sheet lists what each operator does inside it: walk-on music, house lights to half, lectern mic up, title slide, video roll, lights restore.
Each cue usually has a number, a department, an action and a trigger. The trigger is what tells the operator when: a time, a spoken line, or something that happens on stage. Numbering conventions vary. Whole numbers for main cues and decimals for later inserts are common in corporate work. Theatre often uses letter suffixes.
How a cue is called
The person calling the show speaks to operators on headsets. The usual sequence is a standby, then a go. The standby names the department and the cue: "Standby lights 14." The operator answers that they are standing by. Then: "Lights 14, go." The word "go" comes last, and it is the only word that makes anything happen. For that reason many callers avoid saying it in ordinary conversation on headsets.
Details differ. Some callers add a warning before the standby. Some no longer use standbys at all for certain departments. Working stage managers often give the standby somewhere around half a minute to a minute ahead, and most will tell you that being consistent matters more than the exact number. Theatre operators, who have rehearsed, are called by number. On a concert or corporate show with little rehearsal, callers often describe the cue as well: "Next slide, go."
The neighbours: call sheet, BEO and day sheet
Call sheet. One day's who, when and where. Each person's name, role, company, call time, where to report and a phone number, plus the key times and contacts for the day. It is often pulled straight from the production schedule. The film industry uses the same term for a similar document. The live event version differs because the crew comes from several vendor companies, there is an audience, and the fixed points are doors and curfew.
Banquet event order (BEO). The venue's own document. It lists the room, the setup, food and beverage with service times, any venue-supplied AV, and the costs, and both sides sign it. The venue's kitchen, banquet staff and setup crew work from it. Some BEOs include an order of events, mostly for weddings and complex galas. Whether or not yours does, the service times on the BEO and the times on your run of show have to match, because the kitchen is working from theirs.
Day sheet. A touring term. One day of a tour for the travelling party: when the bus leaves, the venue address and dock, load-in, sound check, doors, set time, load-out and the hotel. It plays the same role for a tour that a day-of packet plays for a one-off event. See what goes in a day-of packet.
One moment, five documents
Take a single moment: the first award of the night, at about ten past eight.
| Document | What it says about that moment |
|---|---|
| Agenda | 8:10 PM. Awards presentation. |
| Production schedule | 6:45 to 10:30 PM. Show. All departments at positions. Crew dinner complete by 5:15. |
| Run of show | Item 11. 8:10 PM, 30 minutes. Awards presentation. Ballroom. Owner: stage manager. Host on lectern mic, six recipients on handheld. Dessert served during. Cut first: second video. |
| Cue sheet | Cue 41: walk-up music, award one, on the host saying the recipient's name. Cue 42: lights, stage wash plus follow spot. Cue 43: centre screen to recipient slide. Cue 44: music out as the recipient reaches the lectern. |
| BEO | 8:10 PM. Dessert and coffee service. Servers enter from the east doors. Bar closed during program. |
Five documents, one moment, and three different people changing them. This is where shows come apart: someone moves the awards ten minutes later on the run of show and the BEO still sends dessert out at 8:10, into the keynote.
Why the names blur
If you have been told that a run of show and a cue sheet are the same thing, you were not told wrong. Plenty of working professionals use run of show, rundown, show flow and cue sheet for one and the same document. Others keep cue sheet for the narrower technical list. Which is right depends on the room you are standing in.
Some of it is dialect. Corporate production in the US tends to say run of show or show flow. Sports and broadcast say rundown. Theatre says cue sheet or calling script. Teams in the UK, Ireland and Australia more often say run sheet or running order. These are tendencies, not rules.
The same goes for the line between the production schedule and the run of show. On a large corporate show they are clearly separate. On a small event there is often one sheet that runs from load-in to load-out, and that is fine. What matters is that everyone on the job means the same thing by the name. When you join a new team, ask what they call it and what is in it.
Which ones you need
- A dinner or reception with a short program: an agenda for the client, one run of show for the crew that includes load-in and load-out, and the venue's BEO.
- A gala or awards night with a band and video: a production schedule for the day, a run of show, cues either in the notes or on their own sheet, a call sheet, and the BEO.
- A multi-day conference: all of them. A production schedule across the whole event, one run of show per room per day, cue sheets for the general sessions, a call sheet per day, and a BEO for each catered function.
Keeping them in step
- Pick one source for times. Usually the run of show. The agenda, call sheet and service times are copied from it, never the other way round.
- Number every version and put the date and time on page one.
- Send at set points: the first full draft, after the production meeting, and after rehearsal.
- Route changes through one person. A client asking an operator directly for a change is how two versions of the truth appear.
- Check the venue's copy. After any timing change, confirm the BEO times with your venue contact. Do not assume it reached the kitchen.
Where myROS fits
myROS is built around the run of show. You can read the same show as a timeline or as a cue sheet, across multiple days and rooms, with load-in and logistics in the same place as the program. Because every cue has a start and a length, a change in one place moves the times after it, and the day-of packet is built from the same show.
Common questions
Is a cue sheet the same as a run of show?
It depends who you ask. Many professionals use the terms for the same document. Others use cue sheet for the narrower list of technical actions inside the program.
What is the difference between a run of show and a production schedule?
The production schedule covers load-in to load-out across every day, including crew calls and meal breaks. The run of show covers the program itself, item by item, for one room or stage. Small events often merge them.
What is the difference between a run of show and an agenda?
The agenda is what guests see. The run of show is the crew's version of the same moments, with owners, rooms and technical notes.
Is a rundown the same as a run of show?
Generally yes. Rundown is the usual term in sports and broadcast for the same kind of document.
Is a run sheet the same as a run of show?
Yes. Run sheet and running order are more common in the UK, Ireland and Australia.
What is the difference between a production schedule and a call sheet?
The production schedule is the plan for the whole event. A call sheet is one day's extract: who reports where and when, with contacts.
What is a show flow?
Another name for a run of show, common in corporate AV production.
Where does the BEO fit?
The banquet event order is the venue's document for room setup and food and beverage service. Its service times need to match your run of show.